This case is available in 3 colors - black, white, and titanium. Each also has an option with a side window, although those cost more.
Ranked in these QuestionsQuestion Ranking
Pro Repels dust
Along the entire bottom is a slide-out dust filter. It can be pulled out from the front and cleaned helping to keep dust outside of your build.
Pro Very quiet
The R5 is lined with a sound-resistant material, which helps keep sound low.
Pro Sleek design
The R5 goes for the minimal look, and it nails it. There isn't even any branding on the exterior. Both sides are completely flat slates, and the minimalist design is only broken on the top with I/O up front and 3 removable panels (for cooling solutions).
Pro Extremely customizable layout
All of the internal shelving is removable, meaning you aren't limited to putting certain components in pre-determined spots.
Pro 9 total fan slots
There are 2 included fans - Fractal Design Dynamic GP14 fans rated at 1000RPM. There is 1 located in the front, and 1 in the rear.
In total, there 2 are fan slots in the front, 1 in the rear, 3 on top, 2 in the bottom, and 1 on the side. These provide plenty of options for fan placement.
Pro Plenty of room for water cooling
There is enough room for a 420mm radiator in the top, as well as room for a 360mm radiator in the front.
Con Top panels are almost required
It's best to keep the 3 top panels right where they are - removing them will greatly increase the noise output of the machine, as well as break its dust-seal.
At 11.2kg, this is a very heavy case.