Add to Chrome
Add to Edge
Add to Firefox
Add to Opera
Add to Brave
Add to SafariWhat is the best alternative to NinjaFlex Flexible Filament?
Top Pro
Top Con
Top Pro
Top Pro
Top Pro
Top Con
Top Pro
Top Pro
Top Con
Top Pro
Top Pro
Top Con
Top Con
Top Pro
Top Con
Top Pro
Top Con
Top Pro
Costing around $20 per kg, it’s a great affordable filament in its own right: it has a stated dimensional accuracy is ±0.05mm, guaranteeing that filament diameter is consistent all the way through. The majority of filaments around this price tag does not guarantee this level of accuracy. See More
The manufacturer does not offer a proper public datasheet The website itself appears unfinished and devoid of any useful technical info. A Material Safety Sheet can be found, but it contains no information regarding the mechanical properties of the filament. This is especially troublesome for academic users, such as mechanical engineers. See More
Due to its properties, ABS is a very appropriate material to use for prototyping enclosures for electronic equipment and this filament is no exception. It was specifically designed to provide high-grade protection from ESD (electrostatic discharge) that can damage sensitive electrical components. It can prevent charge from building up on its surface, useful if the printed pieces come into contact with sensitive microelectronics See More
This ABS is tougher than the majority of ABS materials out in the market. Its tensile strength (maximum stretching pressure the material can withstand) is 42 MPa, according to its datasheet. Material property data website MatWeb has stated that the highest-quality ABS withstands at least 40MPa, and 3DXSTAT’s filament goes beyond this value. See More
Since this filament was designed to be used with high-end, expensive Makerbot hardware, its mechanical parameters exceed the standards for regular PLA plastic, as shown in the raw datasheet of the material. It's properties are very well balanced; the filament is quite ductile, meaning tensile strength is a bit higher than that of standard PLA, while maintaining the same high material elasticity. While it isn’t a groundbreaking filament, you can be assured that there is no aspect of this product that can be considered substandard. See More
In terms of 3D printing applications, PLA is very limited. While it’s great for general prototyping and poses fewer health risks, it cannot withstand hot or humid environments: it degrades dramatically when exposed to direct sunlight, high temperatures (above 60ºC) or water. It is way less durable and flexible than materials like ABS and lacks chemical resistance. You need to be aware of what the limits are when using this material. See More
As most Makerbot products, this filament has earned some popularity within the 3D printing community. While Makerbot recommends this filament with their own 3D printers, plenty of people have used this filament for non-Makerbot printers and are quite satisfied with the quality of the results. See More
Makerbot’s packaging keeps the filament inside safe from damage The thick cardboard box protects from mechanical damage while the vacuum-sealed film (together with an included silica pack) keeps the filament safe from air and humidity. This is very important, as filaments absorb water extremely fast. See More
Nylon and nylon-like materials are hard to work with and the setup process is quite cumbersome. A heated bed plate is absolutely necessary or the material won't even stick to the plate. You’ll also need to coat the heated base plate with Kapton tape or Garolite. As the material is quite flexible, non-direct-drive extruders won't work and a very short direct-drive extruder is needed. Getting everything just right takes some time, and it will be a while before you can start making decent quality prints. See More
The full technical documentation is available at Taulman’s website. This is especially useful for professional engineers and those in the academic field. Furthermore, the filament was reviewed, tested and certified by St. Louis Testing Laboratories, ensuring the published technical data is correct. See More
The objets printed with this filament can be subjected to some post-processing. For example, acetone can be used to "weld" multiple ABS parts together, for surface smoothing surface or to create a gloss. The process itself is a bit messy, but there are plenty of tutorials available online. See More
You can find equally decent ABS filaments for half the price of this one. However, getting this more expensive premium ABS filament may buy some peace of mind. But it should be noted that, given that these are simple standard ABS filaments, it's unlikely there will be a major difference between the results obtained when using this one and those obtained with most less expensive alternatives. See More
As is the case with all ABS filaments, you cannot print this filament using a 3D printer that lacks a heated bed. In order for the first layer to adhere properly, the filament requires high temperatures. Otherwise, it may detach from the bed plate. Kapton tape is also recommended, to improve adhesion. See More
This filament can safely be used to create e food and drink containers or parts for food production lines (like conveyor belt parts, for example ), unlike ABS, PLA or other popular 3D printing filament materials. PETG filament is food safe, as there are no potential hazards to food or human body while in contact with this material. In fact, PETG is a modified version of PET, which is a material widely used for food packaging. See More
The material specifications sheet isn't publicly available, but it is possible to request it from regional eSUN distributors. This is a hassle mostly for engineers and those in the academia, who will surely need this, since they will have no choice apart from spending some time and effort to get the specifications sheet. It would be better to have the specs available from the get-go. See More
This filament's resulting prints are very stiff and can withstand great stresses, perfect for when you need extra strength in your projects. This is due to the carbon fibers used in this filament, which are small enough to make it through the printing nozzle, but long enough to add rigidity. See More
Since this filament contains tiny carbon fibers, it’s difficult to print with standard extruders. Adjusting the correct feed rate and printing temperature specifically for your extruder will be necessary. Note that it is also recommended to use stainless steel nozzles while printing this material, since it has been reported that regular brass nozzles may deform while printing this material. See More
The extreme rigidity and stiffness of this material enables the user to print things that normally can't be properly 3D printed. It’s great for printing frames, supports, shells, propellers and even tools. All these applications are interesting for users that are drone builders, RC hobbyists, or similar. See More