Additional features
Guaranteed 0.05 mm dimensional accuracyColors available
28 color options available Additional printed bed adhesion
Blue Painters TapeTensile/compressive strengths
NAResistance to high temperatures
NAResistance to sunlight
NoDiameters available
1.75 mm / 3.0 mmResistance to water and humidity
NoHeated bed required
NoResistance to oils and chemicals
NoDensity
1.27 g / cm^3Additional features
ESD (Electrostatic Discharge) protection, consistent surface resistance, improved retention of impact and elongationColors available
1 color available (black)Additional printed bed adhesion
Kapton Polyimide Tape, ABS/Acetone SlurryTensile/compressive strengths
42 MPa / NAResistance to high temperatures
Up to 105ºCResistance to sunlight
YesDiameters available
1.75 mm / 3.0 mmResistance to water and humidity
YesHeated bed required
YesResistance to oils and chemicals
YesDensity
1.09 g / cm^3Additional features
Flexible nature of material (to up to 660% elongation); adhesion to standard build platforms without glue or tape; abrasion resistance 20% better than ABS and 68% better than PLA; chemical resistance to many materials, including naphtha, ASTM Oils #1-3, petroleum and freonColors available
10 standard colorsAdditional printed bed adhesion
Glue and/or blue painters tape is suggested, if not using a heated bedTensile/compressive strengths
4 MPa / NAResistance to high temperatures
NAResistance to sunlight
YesDiameters available
1.75 mm / 3.0 mmResistance to water and humidity
YesHeated bed required
NoResistance to oils and chemicals
YesDensity
1.19 g / cm^3Additional features
Low surface friction, toughness and flexibilityColors available
1 color available (natural)Additional printed bed adhesion
Kapton tape / GaroliteTensile/compressive strengths
33.09 MPa / NAResistance to high temperatures
Up to 52ºCResistance to sunlight
YesDiameters available
1.75 mm / 3.0 mmResistance to water and humidity
YesHeated bed required
YesResistance to oils and chemicals
PartialDensity
NAAdditional features
Odorless, hydrophobicColors available
9 natural colors availableAdditional printed bed adhesion
Not recommended by manufacturerTensile/compressive strengths
49 MPa / NAResistance to high temperatures
Up to 64ºCResistance to sunlight
YesDiameters available
1.75 mm / 3.0 mmResistance to water and humidity
YesHeated bed required
NoResistance to oils and chemicals
NoDensity
1.23 g / cm^3