Add to Chrome
Add to Edge
Add to Firefox
Add to Opera
Add to Brave
Add to Safari
This is a standard ABS filament of dependable quality, with a decent dimensional accuracy of ±0.05 mm. Although it doesn't have any unique features or special enhancements, it can be used for the same purposes any regular ABS filament can.
SpecsUpdate
Pros
Pro Supports "post-processing"
The objets printed with this filament can be subjected to some post-processing. For example, acetone can be used to "weld" multiple ABS parts together, for surface smoothing surface or to create a gloss. The process itself is a bit messy, but there are plenty of tutorials available online.
Pro Unlikely to create issues
Using this filament, it's unlikely you'll run into issues or have inaccurate diameters, given that it's a pretty standard ABS filament, with nothing remarkable or unusual about it.
Pro Protective packaging
The filament itself is very precisely reeled around the spool, which is then vacuum-sealed in a film with a silica packet, and all of this is neatly placed inside a rigid cardboard box.
Cons
Con Expensive
You can find equally decent ABS filaments for half the price of this one. However, getting this more expensive premium ABS filament may buy some peace of mind. But it should be noted that, given that these are simple standard ABS filaments, it's unlikely there will be a major difference between the results obtained when using this one and those obtained with most less expensive alternatives.
Con Requires a 3D printer with a heated bed
As is the case with all ABS filaments, you cannot print this filament using a 3D printer that lacks a heated bed. In order for the first layer to adhere properly, the filament requires high temperatures. Otherwise, it may detach from the bed plate. Kapton tape is also recommended, to improve adhesion.
Con Impossible to be used with a 3.0 mm extruder
If your printer has a 3.0 mm extruder, you won't be able to use this filament, since it only comes in 1.75mm form. For Makerbot, this is justifiable, since all of their hardware uses 1.75 mm.
Recommendations
Comments
