When comparing Asrock AMD 990FX Extreme9 vs ASUS TUF SABERTOOTH 990FX R2.0, the Slant community recommends Asrock AMD 990FX Extreme9 for most people. In the question“What are the best AMD AM3+ motherboards for gaming?” Asrock AMD 990FX Extreme9 is ranked 1st while ASUS TUF SABERTOOTH 990FX R2.0 is ranked 2nd. The most important reason people chose Asrock AMD 990FX Extreme9 is:
With the available PCIe lanes on the board the user can easily Crossfire their GPUs at 8x speed each.
Ranked in these QuestionsQuestion Ranking
Pros
Pro Crossfire compatible at good speeds
With the available PCIe lanes on the board the user can easily Crossfire their GPUs at 8x speed each.
Pro Good selection of USB
There are four USB 3.0 slots as well as four USB 2.0 slots, so should allow for a multitude of USB devices to be connected easily.
Pro Easy access settings
Controls in the BIOS can be accessed through a desktop GUI app, meaning the user does not need to boot into the BIOS in order to change their settings. This is great for fan controls as well as other key settings.
Pro Good heat dissapation
This board uses a ceramic coating which allows for more heat dispersion and thus a cooler running system. This is good being an AMD board where the CPUs do tend to run hot.
Cons
Con Not the best onboard sound
While the onboard sound is serviceable, a dedicated card will sound much better. This can often be the norm for a motherboard, but there are boards out there wil quality built in sound, this is just not one of them.
Con Poor SATA placement
The GPU will cover some of the SATA ports making them inaccessible if a GPU is used. That means the GPU will have to be taken out in order to gain access to those ports, either to add a new drive or unhook one already plugged in.
Con Not all sockets are clearly labled
Some sockets on the board are difficult to figure out what they are for due to poor labeling. It can be looked up online, but that should not have to be a necessity.
Con Memory is too close to CPU
Depending on how high the heatsinks are on ones RAM modules, it may be too close to the CPU when using a tower cooler. Depending on ones case size and how they have to attach the cooler, the RAM may get in the way.