Add to Chrome
Add to Edge
Add to Firefox
Add to Opera
Add to Brave
Add to SafariWhen comparing Philips Hue tap switch vs Luton Caséta Wireless in-wall light dimmer with remote, the Slant community recommends Philips Hue tap switch for most people. In the question“What are the best HomeKit light switches?” Philips Hue tap switch is ranked 1st while Luton Caséta Wireless in-wall light dimmer with remote is ranked 2nd. The most important reason people chose Philips Hue tap switch is:
There is a wall mount included which attaches with sticky strips. The switch itself twists off the mount, allowing you to take it with you to be used as a remote control if you so choose.
Question Ranking
Pros
Pro Mount on the wall, or use as a mobile remote
There is a wall mount included which attaches with sticky strips. The switch itself twists off the mount, allowing you to take it with you to be used as a remote control if you so choose.
Pro No batteries required - uses kinetic energy
This switch uses the kinetic energy from pressing the button to power itself. That means that it doesn't need to be plugged in, and you never have to worry about the batteries dying.
Pro 4 configurable buttons
There are 4 buttons on the Tap - one large main one which covers the entire front, and then 3 smaller buttons for additional scenes which can be custom configured through the app. Together, this switch allows for control of 4 separate scenes.
Pro No neutral wire required
Unlike most switches, the Caséta works without a neutral wire. This means it will be easy to install in older homes that lack neutral wires.
Pro Powerful Siri integreation
Once all setup, you can turn off lights in each room and also each zone. For example, you could turn on just your bedroom lights, or the bedroom as well as any other room upstairs if you've included the bedroom in the upstairs zone.
Pro Includes remote
If you sometimes want to use a physical remote instead of always using Siri, you can. The remote's battery is rated for 10 years. It comes with a mount which can be mounted to a table or the wall for extended control.
Cons
Con Lots of force required to activate the switch
Because the kinetic energy from pressing the switch is used to power the switch itself, you really need to push the button hard in order to activate it, requiring much more force than regular switches.
Con Ugly mount
When mounted on the wall, the switch looks futuristic. However, once you remove the switch the mount itself is left exposed. It looks like a smoke detector mount, except instead of hiding away on the ceiling it's generally going to be exposed on a highly visible wall.
Con Hue Bridge required
The Hue tap switch isn't a stand-alone switch - you need a Hue Bridge in order for it to work.
Con Less convenient when plugging/unplugging lights
This switch only controls two lights at a time which need to be plugged into the switch. This also means that the switch itself needs to be plugged into a wall socket, which are typically low to the ground making the wall switch harder to reach.
Con Apple TV required for remote control
If you are away from home and want to turn on lights, or check to see if any lights are on, you will need an Apple TV. If you already have one, this isn't a big deal however for many out there this will add another device and another initial startup cost.
Con Clunky setup
You need to download a separate app, create an account for it, and add each device separately to the app.
