When comparing EVGA Torq X5 Optical vs Roccat Lua, the Slant community recommends EVGA Torq X5 Optical for most people. In the question“What is the best gaming mouse?” EVGA Torq X5 Optical is ranked 30th while Roccat Lua is ranked 38th. The most important reason people chose EVGA Torq X5 Optical is:
The X5 has a decent resting area for the ring finger to rest as well as the thumb and pinkie finger.
Specs
Ranked in these QuestionsQuestion Ranking
Pros
Pro Somewhat ergonomic
The X5 has a decent resting area for the ring finger to rest as well as the thumb and pinkie finger.
Pro Ambidextrous
Don't fret lefties!
Pro Inexpensive
Good value!
Pro Customisable lighting
The X5 has color options as well as simple breathing affects.
Pro Uses the Pixart 3988 (6400 dpi/cpi)
The Pixart 3988 is one of the best sensors with zero acceleration and exceptional tracking.
Pro Smaller design
The smaller design of this mouse has been appreciated by many.
Pro Lightweight
At under 100 grams, the X5 is very lightweight. Although some prefer heavier mice, the lightweight nature improves handling and overall accuracy.
Pro Comfortable to use
Its rather small size and lower than usual height allow for a substantially comfortable grip. The sides have a dent which helps fingers positioning. Additionally, the sides are smoothly textured so you shouldn’t ever feel like your hand is losing its grip.
Pro Well suited for fingertip and claw grips
Unless you have small hands, this is a mouse that is meant for people who use either the claw or fingertip grip. In addition to being a small mouse and having low height, it's also extremely light, weighing only 68 grams. This makes it easy to control with a fingertip and claw grip as it relies on the mouse being as agile as it can be.
Pro Well built
Even though it’s a budget mouse, it has high quality components to ensure that the mouse can last for years. There are no unnecessary moving parts while button clicks are clear and don’t give out after heavy use. The body of the mouse consists of rubberized coating at the top and textured plastic on the sides which gives it a quality feel.
Pro Good amount of customization provided by the accompanying software
The software is very simple and easy to use. It lets you change the DPI steps, double click speed, vertical scroll speed, polling rate, very basic lighting control and the choice of hand-mode. In addition, it has the option to reassign its buttons, but since the Lua has only four buttons it’s practically useless as the main three are almost always invariable.
Pro Excellent budget sensor
The Avago A3050 optical sensor that the Lua uses has small, unnoticeable prediction and doesn’t carry over perfect tracking at high speeds (depending on the chosen DPI setting, over 60-120 inches per second or 1.5 m/s-3 m/s). But unless you use it at extremely low sensitivity, it shouldn’t be a problem. When reaching such speeds, some negative acceleration may be noticed.
Pro Full Linux support
Roccat has good Linux drivers.
Pro Can be used by both righties and lefties
Uses an ambidextrous design that actually feels as if it is and ergonomic design no matter what hand is using it.
Pro On-the-fly CPI switch
There is a button right behind the scroll wheel that will allow for on-the-fly CPI switching.
Cons
Con Scroll wheel
Although it features nice, defined scroll steps, the rubber coating on the X5's scroll wheel is quite unexceptional to say the least.
Con Lacks sidebuttons
Since it’s in the style of a classic three-button mouse, the lack of side buttons limits customization options.
Con Small size takes some getting used to
The Roccat Lua is a small mouse, measuring only 11.5 cm in length and 3 cm in height. The width is pretty standard with 6.5 cm at the back and narrows down towards the front. The small size might raise some concern about the grip. If it’s your first mouse of this size you might need to adjust your grip to accommodate for the smaller scale of the mouse. Commonly the grips change and include some elements of a fingertip grip.
Con Top DPI value may feel insufficient for some gamers
The DPI amount caps at 2000, which might not be enough for some.
Con Can suffer from small amounts of jitter on high DPI values
This mouse's DPI setting can be set from 250 to 2000, in increments of 250. At DPI settings higher than 1250, it can generate small amounts of jitter. The mouse works the best at 500 DPI with a 1000Hz polling rate.
Con Rubber cord is prone to breaking
It has a rubber type cable which means there’s less resistance and drag against the desk but at the same time can be more prone to damage when bent.
Con Light weight takes some getting used to
At 68 grams, it's about 30% lighter than most mice. Switching from an average mouse might take some getting used to and feel like the Lua is a bit floatey.
Con Uses an outdated sensor
The Lua’s optical sensor might be a bit dated, since it was released five years ago. Still, it mostly only shows weakness when it is facing really fast mouse movements. And as long as you are aware of it, this shortcoming can be entirely avoided.
Con Low palmrest height
The low palmrest height may be a turn off for some palm style users.