When comparing NVIDIA GeForce GTX 1060 3 GB vs AMD Radeon R9 Fury X, the Slant community recommends AMD Radeon R9 Fury X for most people. In the question“What are the best GPUs for gaming?” AMD Radeon R9 Fury X is ranked 10th while NVIDIA GeForce GTX 1060 3 GB is ranked 12th. The most important reason people chose AMD Radeon R9 Fury X is:
Using High Bandwidth Memory (HBM) this card can provide much faster speeds than GDDR5 (which many current graphics cards use). This allows for a peak throughput of 512GB/s. This is accomplished by stacking DRAM vertically.
Specs
Ranked in these QuestionsQuestion Ranking
Pros
Pro Excellent 1080p performance, suitable for 1440p
The GTX 1060 (3 GB) performs extremely well in 1080 (Full HD) gaming situations, often providing a very playable framerate with maximum fidelity settings. For example, the average FPS in Rise of The Tomb Raider (maximum settings) is a very smooth 70 frames per second and the card scores 52 average frames per second in Hitman. The 3 GB GTX 1060 also does well in Tom Clancy's The Division, where it achieves a result of 58 average frames per second with maximum detail.
Gaming in 1440p is also a possibility with the horse power the GTX 1060 3 GB provides. In Rise of the Tomb Raider, Hitman and The Division - all with maximum settings, the card is able to achieve average framerates of 46, 37 and 41, respectively. Performance can further be improved by toning down the details a bit.
When comparing the GTX 1060 3 GB to its bigger 6 GB version with 10% more CUDA cores, a performance decrease is noticeable. In the same benchmarks, the larger 6 GB version has an advantage of 8 FPS in Rise of The Tomb Raider, 13 FPS in Hitman and 4 FPS in The Division, all measured in 1080p.
Pro Consumes little power for its performance
Power consumption levels of the GTX 1060 are very good. While the power consumption is somewhat higher than the previous-generation GTX 960 in some gaming circumstances - the new 1060 is the fastest graphics card on the market with a limited maximum consumption of 120 watts. In an idle situation, the GTX 1060 only uses about 9 watts of power - almost half of the amount a RX 480 requires at 16 watts. When looking at intensive full load scenario's such as a Furmark test, the maximum power consumption measured for the GTX 1060 is around 122 watts - a whopping 44 watts less than AMD's RX 480.
The power consumption difference between the GTX 1060 3GB and 6GB is negligible, although the 3GB-version surprisingly consumes around 4 watts more power under load.
Pro Offers exclusive features such as Ansel and Simultaneous multi-projection
The GTX 1060 and other Pascal-based GPU's from NVIDIA offer a couple of exclusive features that aren't available on previous-generation graphics cards or current GPU's made by AMD.
Taking advantage of the new GPU architecture, NVIDIA has introduced a feature called simultaneous multi-projection. It allows developers of games and applications to improve performance when rendering multiple viewports of the same image. This is particularly useful when using a multi-monitor setup or in virtual reality where two images are required, one for each eye. Simultaneous multi-projection allows up to 16 different viewpoints and only requires calculating the geometry of a scene once. In compatible games, users of multi-screen setups can calibrate this experience so that distortion no longer occurs. Virtual reality games can use SMP to improve performance, although developers will specifically need to implement this feature in their games.
Ansel is another feature that is exclusive to NVIDIA's Pascal-based graphics cards. Ansel can be described as a very extensive 'photomode', where you can capture massive in-game screenshots of several gigapixels or capture images in 360 degrees. The player is also able to use filters, adjust camera positions, take HDR-images and share them via the built-in software.
Pro Can handle overclocks well
By overclocking your graphics card, you increase the clock speeds of the chip and memory to gain even more performance. The GTX 1060 handles overclocks well, relatively high boosts of over 200 MHz for both the GPU and memory clock speeds aren't uncommon without the use of special cooling solutions. In this case, an overclock of 229 MHz on the GPU and 380 MHz on the memory result in a 14% better performance in Battlefield 3, in 1440p resolution.
Pro Fast memory speeds
Using High Bandwidth Memory (HBM) this card can provide much faster speeds than GDDR5 (which many current graphics cards use). This allows for a peak throughput of 512GB/s. This is accomplished by stacking DRAM vertically.
Pro Liquid cooling for low heat and noise
The closed-loop liquid cooling circuit that comes with this graphics card helps cool it much more effectively than air can, and also produces less noise than a regular stock air fan would (especially AMDs stock cooling fans which are regarded as some of the loudest out there). Overall a good choice for quite AMD cooling out of the box.
Pro Great power efficiency
The idle power consumption is under 5W, which is helped by the more power friendly HBM as opposed to GDDR5 configuration.
Gaming power requirements are also good - an average of around 225W. This beats the GeForce GTX 980 Ti by a small margin.
Pro Great fps when playing high end games
Battlefield 4 @1440p: 67.8fps average (54 min/82 max)
@2160p: 35.8fps average (28 min/44max)
Far Cry 4 @1440p: 77.4fps average (61 min/112 max)
@2160p: 44.4fps average (34 min/61 max)
Grand Theft Auto V @1440p: 72.9fps average (54 min/97 max)
@2160p: 38.4fps average (28 min/47 max)
The Witcher 3 @1440p: 59.2fps average (47 min/68 max)
@2160p: 36.6fps average (28 min/41 max)
Cons
Con Less ideal for use with high-quality texture settings, not futureproof
Three gigabytes of video memory suffices for most gaming situations in 1080p, but the 3GB version of the GTX 1060 might hit limitations when using high-quality texture packs or when using high-resolution texture options (such as gaming in 4K). Multisample anti-aliasing is also quite memory intensive and is less ideal for use with this version of the GTX 1060. Although the lower memory might not form a major issue nowadays, future titles will require more and more video memory in order to run decently.
Con Lacks support for SLI
The GTX 1060 does not offer support for SLI - short for Scalable Link Interface - which allows users to install multiple identical graphics cards in order to gain performance. In other words, you can't connect two or more GTX 1060's and run a dual- or multiple-GPU solution which is very remarkable for mid-range graphics cards.
Con Disappointing performance improvements when using Vulkan
Vulkan is a graphical API that allows developers to communicate better with the GPU, which in theory should result to performance improvements compared to the more standard DirectX 12 or OpenGL API's. The GTX 1060 doesn't do particularly better in Vulkan however, and the difference with the standard OpenGL is very minimal.
Doom is one of the first (and only) titles with support for Vulkan and serves as a good benchmark for OpenGL vs Vulkan performance. Using Ultra settings and a 1080p resolution, the GTX 1060 3 GB is able to achieve an average framerate of 103 FPS and 65 FPS when tested in 1440p. When using Vulkan, performance improvements are not substantial with 109 FPS (+5,5%) and 71 FPS (+8,5%).
AMD's new Polaris-architecture graphics cards are significantly better optimized for Vulkan compared to the GTX 1060 and other NVIDIA Pascal-based GPU's. For example, the AMD Radeon RX 480 performs significantly better in Vulkan, with 1080p results of 85 FPS for OpenGL and 111 FPS in Vulkan, a 30.59% increase.
Con Ever present coil whine
The card emits a high pitch whine when in use (which is always). It may not be heard when the pump is in action as that itself is noisy, but the coil whine is definitely audible when the pump is not running, which can be pretty annoying. One caveat is that this may be louder on some cards over others, but there is no way to know until the card is used.
Con Cooling components vibrate
Because the pump needs to circulate water, it will cause some vibrations along the tubes. This may be annoying to some when running as it is audible.
Con No room for overclocking
Under a stress test, temperatures reach their maximum. This means that there is little to no room for aftermarket overclocking. Basically this card is already overclocked, which is why it comes with its own liquid cooling unit.