When comparing BenQ HT2050A vs LG PH300, the Slant community recommends BenQ HT2050A for most people. In the question“What are the best projectors?” BenQ HT2050A is ranked 1st while LG PH300 is ranked 6th. The most important reason people chose BenQ HT2050A is:
The 1.3x zoom lens allows some flexibility in the throw distance. The vertical lens shift on this projector lets you move the image up and down by about 10% of the image size. This is helpful if you happen to install the projector with a small offset.
Specs
Ranked in these QuestionsQuestion Ranking
Pros
Pro Easy to set up
The 1.3x zoom lens allows some flexibility in the throw distance. The vertical lens shift on this projector lets you move the image up and down by about 10% of the image size. This is helpful if you happen to install the projector with a small offset.
Pro Bright and detailed picture
The BenQ HT2050 is a bright projector with amazing contrast. Its native resolution of 1920x1080 produces a detailed Full HD picture.
The 2,200 Lumens of brightness on this BenQ is high enough to deal with some ambient light. You can watch movies in daytime with curtains rolled down.
A 15,000:1 contrast ratio means that the white image is 15,000 times brighter than the black image. This gives the projector great black-levels and shadow detail so the dark scenes in movies will look great.
Pro No blur from fast motion
Motion handling is great on the HT2050, as for all the DLP (digital light processing) projectors. In movie scenes with fast motion, the picture won’t get blurry.
Pro Low input lag for gaming
For gamers requiring a low input lag, the HT2050 is the best way to go since it beats most of its competitors with an input lag of only 17ms.
Pro Quiet fans
HT2050 has very quiet fans, almost unnoticeable unless there’s total silence. The fans produce more or less the same noise in both ECO and performance modes.
Pro Great picture for video content
LG PH300 has a native 1280x720 high-definition resolution with a 16:9 aspect ratio. This is great for playing video content. For a pico-projector, the PH300 also has very decent black levels (the contrast ratio is 100 000:1).
Pro Very small and light
This LG is only 2.5 x 3.5 x 4.5 inches in size. It weighs just one pound.
Pro Everlasting lamp
The lamp lasts for up to 30 000 hours, so you probably will never have to replace it. Replacement lamps for PH300 are hard to find anyways.
Pro Low input lag for gaming
It has a 33ms input lag, meaning you can take it to a lan-party or play video games on a big screen while travelling.
Pro Rather quiet fans
The fan noise is a high-pitch whiny noise: 26 dB in normal mode and 28 dB in high brightness mode. The projector is rather quiet, but you can still hear the fans buzzing.
Cons
Con Rainbow effects
Rainbow effects are an issue for this projector, as is the case for most DLP projectors. They create rainbows on bright objects on dark backgrounds, for example streetlights. Some people don’t notice them, some find them extremely annoying. Luckily, the BenQ proves to show less rainbow artifacts than an average DLP.
Con Expensive replacement lamps
The replacement lamps cost $250. Of all the inexpensive projectors, HT2050 has one of the most expensive replacement lamps.
Con Poor sound quality
It’s not recommended to use the built-in audio system. These one-watt stereo speakers have disappointing sound quality.
Con Rainbow artifacts
It is a single-chip DLP projector, so you might experience a rainbow effect on the screen every once in a while.