When comparing Zowie FK2 vs Logitech G400, the Slant community recommends Logitech G400 for most people. In the question“What are the best FPS gaming mice?” Logitech G400 is ranked 15th while Zowie FK2 is ranked 33rd. The most important reason people chose Logitech G400 is:
The Logitech G400 gaming mouse was clearly designed specifically for palm grip.
Specs
Ranked in these QuestionsQuestion Ranking
Pros
Pro No unnecessary functionality
Zowie has kept the FK2 remarkably simple. There's no RGB lighting, adjustable weights, or superfluous buttons that end up only getting in the way. It's plug-and-play and requires no additional software. You can customize only the essential settings such as lift off distance, polling rate, or switch between left or right-handed modes with just a combination of specific button presses.
Pro Excellent 3200 CPI optical sensor
The Zowie FK2 gaming mouse uses an Avago 3310 optical sensor which is regarded as one of the best in the world. It has no built-in acceleration and no angle snapping. It’s practically jitter-less when set at 125 and 500Hz polling rate, and has barely noticeable jitter at 1000Hz.
The Avago 3310 has no native CPI, it is made to have each step of 50 CPI work as well as the previous one. With CPI steps of 400/800/1600/3200 for the FK1, all CPI choices should work equally well.
Pro Great for palm grip
The Logitech G400 gaming mouse was clearly designed specifically for palm grip.
Pro Thumb-rest
There is a built in ergonomic thumb rest so users can rest there thumb instead of constantly gripping.
Pro Comfortable side button placement
The two side buttons are located in an easy to reach, unobtrusive position.
Pro A true successor to the legendary MX518
The Logitech G400 gaming mouse is based off of MX518. It has a few minor incremental improvements that don't change what made the original so great.
Pro Accurate 3600 CPI optical sensor
The mouse has an accurate Avago ADNS-3095 optical 3600 CPI sensor. No angle snapping, no acceleration, no prediction.
Pro Quick-access CPI shift
Above and below the scroll-wheel there are buttons that allow increasing and decreasing between 400 and 3600 CPI on the fly.
Pro Good build quality
High quality rubberized coating is used among other materials to give a quality product feel.
Pro CPI shift
CPI can be changed from 400 CPI up to 3600 CPI without having to interrupt workflow.
Cons
Con Only 4 DPI settings
Even though the ADNS-3310 sensor supports DPI settings in increments of 50, the FK1 only lets you choose between 400 / 800 / 1600 / 3200 DPI.
Con Middle click needs too much force
Plenty of people use the middle mouse button to move the map around. Unfortunately the middle click for this mouse takes too much force to be used consistently.
Con Scroll wheel is shallow and loose
Like the versions before it, the scroll wheel feels shallow and loose.
Con Lift off distance too high
The lift off distance is too high for this device but it can be fixed by using the tape trick.
Con Superseded by Logitech G400s
This unit is no longer in production though some units can still be found on Amazon and Ebay.