When comparing Belkin BP112230-08 vs Accell Powermid, the Slant community recommends Belkin BP112230-08 for most people. In the question“What are the best surge protectors?” Belkin BP112230-08 is ranked 1st while Accell Powermid is ranked 9th. The most important reason people chose Belkin BP112230-08 is:
It has a clamping threshold of 330V which is about as low as it can get. The clamping voltage indicates when the device will start to redirect the excess electricity away from the plugged-in devices. The lower the better.
Specs
Ranked in these QuestionsQuestion Ranking
Pros
Pro Low clamping voltage
It has a clamping threshold of 330V which is about as low as it can get. The clamping voltage indicates when the device will start to redirect the excess electricity away from the plugged-in devices. The lower the better.
Pro High surge suppression rating
It has an impressive suppression rating of 4320 joules. This rating generally indicates how much energy it can absorb across its lifespan.
Pro Creative outlet design
Eight out of twelve available outlets can be rotated up to 90 degrees to create space for big power plugs. This is a creative design that allows the panel to be relatively compact while still being able to power many sockets.
Pro Additional conveniences
It can be wall mounted for more placement options, and also has a cable management clip to help organize the connected wires more efficiently.
Pro Angle of outlets makes it ideal for wall warts to stay plugged in
This applies to whether the surge protecter is sitting upright as pictured, or even upside down mounted to the underside of a desk.
Pro Has keyhole mounting slots
The newer version of this product does not have keyhole slots for mounting on walls, or the underside of your desk. This version does.
Pro Two USB Ports
At 2.1 Amps shared between both ports it's not the fastest, so consider it a bonus. This version is cheaper than the version without USB ports; go figure.
Pro All six outlets should be usable no matter the bulkiness of your wall warts
It is the rare wall wart that will block other outlets on this surge protector power strip combo.
Cons
Con Unreliably tells you when it stops protecting your devices
This surge protector will still provide power to all your connected devices even after it has stopped protecting them. To know whether it still functions, you need to check the LED’s. It isn’t as convenient as it sounds since such devices tend to be put in places out of sight. It is also possible to simply forget about its existence after multiple years of use.
Con Manufacturer doesn’t honor the warranty claim
The manufacturer has a reputation of not upholding their warranty claims. They claim to compensate for any equipment that has been damaged by power surges while connected to their surge protector. Many have reported not receiving their owed money.
Con On/off button tends to break
The on/off button has a tendency to break, but luckily, pulling out the main cable out of the wall socket can be a good work-around.
Con Plug into wall is not low profile
Will take up a minimum of 2-3" from the electric socket.