When comparing Makerbot PLA Filament vs 3DXSTAT ESD-Safe ABS Filament, the Slant community recommends Makerbot PLA Filament for most people. In the question“What are the best filaments for 3D printing?” Makerbot PLA Filament is ranked 2nd while 3DXSTAT ESD-Safe ABS Filament is ranked 3rd. The most important reason people chose Makerbot PLA Filament is:
Since this filament was designed to be used with high-end, expensive Makerbot hardware, its mechanical parameters exceed the standards for regular PLA plastic, as shown in the raw [datasheet](https://eu.makerbot.com/fileadmin/Inhalte/Support/Datenblatt/MakerBot_R__PLA_and_ABS_Strength_Data.pdf) of the material. It's properties are very well balanced; the filament is quite ductile, meaning tensile strength is a bit higher than that of standard PLA, while maintaining the same high material elasticity. While it isn’t a groundbreaking filament, you can be assured that there is no aspect of this product that can be considered substandard.
Ranked in these QuestionsQuestion Ranking
Pro Above average mechanical parameters
Since this filament was designed to be used with high-end, expensive Makerbot hardware, its mechanical parameters exceed the standards for regular PLA plastic, as shown in the raw datasheet of the material. It's properties are very well balanced; the filament is quite ductile, meaning tensile strength is a bit higher than that of standard PLA, while maintaining the same high material elasticity. While it isn’t a groundbreaking filament, you can be assured that there is no aspect of this product that can be considered substandard.
Pro Health risks are lower than with ABS
3D printing PLA poses fewer health risks than ABS.
Pro Has proven its value with the 3D printing community
As most Makerbot products, this filament has earned some popularity within the 3D printing community. While Makerbot recommends this filament with their own 3D printers, plenty of people have used this filament for non-Makerbot printers and are quite satisfied with the quality of the results.
Pro No heated bed required
Using a PLA filament does not require your 3D printer to have a heated bed.
Pro Available in 10 different colors
This filament is available in 10 different colors, all of which offer consistent quality and looks.
Pro Proper packaging protects filament from mechanical damage, air and humidity
Makerbot’s packaging keeps the filament inside safe from damage The thick cardboard box protects from mechanical damage while the vacuum-sealed film (together with an included silica pack) keeps the filament safe from air and humidity. This is very important, as filaments absorb water extremely fast.
Pro Suitable to be used with electronic equipment
Due to its properties, ABS is a very appropriate material to use for prototyping enclosures for electronic equipment and this filament is no exception. It was specifically designed to provide high-grade protection from ESD (electrostatic discharge) that can damage sensitive electrical components. It can prevent charge from building up on its surface, useful if the printed pieces come into contact with sensitive microelectronics
Pro Suitable for hot and humid settings
You can use this filament in standard ABS applications, such as for printing objects and parts that need to withstand hot and humid environments.
Pro Stronger than the majority of ABS materials
This ABS is tougher than the majority of ABS materials out in the market. Its tensile strength (maximum stretching pressure the material can withstand) is 42 MPa, according to its datasheet. Material property data website MatWeb has stated that the highest-quality ABS withstands at least 40MPa, and 3DXSTAT’s filament goes beyond this value.
Pro Filament's package provides good protection
The packaging of this filament is outstanding and protects the filament from external factors very well. The product comes packed in a very stylish 3DXSTAT box that, besides protection, gives it a premium feel. The spool itself is sealed in vacuum film with a silica packet.
Pro Can be used with virtually any standard 3D printer
You can use this filament with pretty much any standard 3D printer, since it's available in the two most commonly used diameters: 1.75 mm and 3.0 mm. Unlike other filaments, 3DXSTAT offers both sizes for the same price (1.75 mm is usually more expensive).
Con PLA's applications for 3D printing are quite limited
In terms of 3D printing applications, PLA is very limited. While it’s great for general prototyping and poses fewer health risks, it cannot withstand hot or humid environments: it degrades dramatically when exposed to direct sunlight, high temperatures (above 60ºC) or water. It is way less durable and flexible than materials like ABS and lacks chemical resistance. You need to be aware of what the limits are when using this material.
Con Impossible to be used with a 3.0 mm extruder
If your printer has a 3.0 mm extruder, you won't be able to use this filament, since it only comes in 1.75mm form. For Makerbot, this is justifiable, since all of their hardware uses 1.75 mm.
With a minimum price tag of $90.00/kg of filament, most 3D printing enthusiasts will have to consider this a serious investment for their high-end 3D printers. The price is somewhat offset by the fantastic quality of the filament, though.
Con Only available in black
Black is the only color available for this filament, which may be disappointing for some users. 3DXSTAT seems uninterested in adding more color options for their filaments.