When comparing Taulman3D Bridge Nylon Filament vs Makerbot ABS Filament, the Slant community recommends Makerbot ABS Filament for most people. In the question“What are the best filaments for 3D printing?” Makerbot ABS Filament is ranked 4th while Taulman3D Bridge Nylon Filament is ranked 6th. The most important reason people chose Makerbot ABS Filament is:
Using this filament, it's unlikely you'll run into issues or have inaccurate diameters, given that it's a pretty standard ABS filament, with nothing remarkable or unusual about it.
Specs
Ranked in these QuestionsQuestion Ranking
Pros
Pro Has nylon-like properties
Based off Taulman’s popular and very strong Nylon 645, this filament is strong, very flexible and has low surface friction.
Pro Several uncommon applications for 3D printed parts
Due to its strength and grippy surface, this filament can be used to produce weight-bearing surfaces, parts subject to friction and tapped/threaded parts. Its flexibility also makes it useful for fabricating plugs and gaskets.
Pro Great technical documentation
The full technical documentation is available at Taulman’s website. This is especially useful for professional engineers and those in the academic field. Furthermore, the filament was reviewed, tested and certified by St. Louis Testing Laboratories, ensuring the published technical data is correct.
Pro Affordable
A decent Nylon 645 filament can cost between $30 and $50. However, this filament is priced at around $20/$25, which puts its price on par with how much most PLA/ABS filaments cost.
Pro Unlikely to create issues
Using this filament, it's unlikely you'll run into issues or have inaccurate diameters, given that it's a pretty standard ABS filament, with nothing remarkable or unusual about it.
Pro Supports "post-processing"
The objets printed with this filament can be subjected to some post-processing. For example, acetone can be used to "weld" multiple ABS parts together, for surface smoothing surface or to create a gloss. The process itself is a bit messy, but there are plenty of tutorials available online.
Pro Protective packaging
The filament itself is very precisely reeled around the spool, which is then vacuum-sealed in a film with a silica packet, and all of this is neatly placed inside a rigid cardboard box.
Cons
Con Difficult to use
Nylon and nylon-like materials are hard to work with and the setup process is quite cumbersome. A heated bed plate is absolutely necessary or the material won't even stick to the plate. You’ll also need to coat the heated base plate with Kapton tape or Garolite. As the material is quite flexible, non-direct-drive extruders won't work and a very short direct-drive extruder is needed. Getting everything just right takes some time, and it will be a while before you can start making decent quality prints.
Con Impossible to be used with a 3.0 mm extruder
If your printer has a 3.0 mm extruder, you won't be able to use this filament, since it only comes in 1.75mm form. For Makerbot, this is justifiable, since all of their hardware uses 1.75 mm.
Con Expensive
You can find equally decent ABS filaments for half the price of this one. However, getting this more expensive premium ABS filament may buy some peace of mind. But it should be noted that, given that these are simple standard ABS filaments, it's unlikely there will be a major difference between the results obtained when using this one and those obtained with most less expensive alternatives.
Con Requires a 3D printer with a heated bed
As is the case with all ABS filaments, you cannot print this filament using a 3D printer that lacks a heated bed. In order for the first layer to adhere properly, the filament requires high temperatures. Otherwise, it may detach from the bed plate. Kapton tape is also recommended, to improve adhesion.