Add to Chrome
Add to Edge
Add to Firefox
Add to Opera
Add to Brave
Add to SafariWhen comparing Taulman3D Bridge Nylon Filament vs Hatchbox PLA Filament, the Slant community recommends Hatchbox PLA Filament for most people. In the question“What are the best filaments for 3D printing?” Hatchbox PLA Filament is ranked 1st while Taulman3D Bridge Nylon Filament is ranked 6th. The most important reason people chose Hatchbox PLA Filament is:
Costing around $20 per kg, it’s a great affordable filament in its own right: it has a stated dimensional accuracy is ±0.05mm, guaranteeing that filament diameter is consistent all the way through. The majority of filaments around this price tag does not guarantee this level of accuracy.
Specs
Question Ranking
Pros
Pro Has nylon-like properties
Based off Taulman’s popular and very strong Nylon 645, this filament is strong, very flexible and has low surface friction.
Pro Several uncommon applications for 3D printed parts
Due to its strength and grippy surface, this filament can be used to produce weight-bearing surfaces, parts subject to friction and tapped/threaded parts. Its flexibility also makes it useful for fabricating plugs and gaskets.
Pro Great technical documentation
The full technical documentation is available at Taulman’s website. This is especially useful for professional engineers and those in the academic field. Furthermore, the filament was reviewed, tested and certified by St. Louis Testing Laboratories, ensuring the published technical data is correct.
Pro Affordable
A decent Nylon 645 filament can cost between $30 and $50. However, this filament is priced at around $20/$25, which puts its price on par with how much most PLA/ABS filaments cost.
Pro Great value for money
Costing around $20 per kg, it’s a great affordable filament in its own right: it has a stated dimensional accuracy is ±0.05mm, guaranteeing that filament diameter is consistent all the way through. The majority of filaments around this price tag does not guarantee this level of accuracy.
Pro Great packaging that ensures proper protection
For this filament's price, its packaging is pretty great. It comes with its own spool, uncommon for filaments in this price range. The spool is also vacuum sealed in a tight film and packed in a rigid cardboard box.
Pro Comes in 28 different colors
Hatchbox offers this filament in a total of 28 different colors, even if the exact colors available may vary for each of the versions (1.75 mm and 3.0 mm). Note that some of colors (like the wooden one) might cost a couple of dollars more than regular colors.
Pro Can be used with both 1.75 mm and 3.0 mm extruders
You can use this filament with printers that have either 1.75 mm or 3.0 mm extruders, since this filament comes in both sizes. However, the 3.0 mm version costs a few dollars more than the 1.75 mm one.
Cons
Con Difficult to use
Nylon and nylon-like materials are hard to work with and the setup process is quite cumbersome. A heated bed plate is absolutely necessary or the material won't even stick to the plate. You’ll also need to coat the heated base plate with Kapton tape or Garolite. As the material is quite flexible, non-direct-drive extruders won't work and a very short direct-drive extruder is needed. Getting everything just right takes some time, and it will be a while before you can start making decent quality prints.
Con No mechanical datasheet available
The manufacturer does not offer a proper public datasheet The website itself appears unfinished and devoid of any useful technical info. A Material Safety Sheet can be found, but it contains no information regarding the mechanical properties of the filament. This is especially troublesome for academic users, such as mechanical engineers.
