When comparing Moen Adler WaterSense Showerhead vs Delta Single-Spray Showerhead, the Slant community recommends Moen Adler WaterSense Showerhead for most people. In the question“What are the best showerheads under $25?” Moen Adler WaterSense Showerhead is ranked 2nd while Delta Single-Spray Showerhead is ranked 4th. The most important reason people chose Moen Adler WaterSense Showerhead is:
The WaterSense uses 30% less water than an average showerhead while keeping water pressure equally strong.
Specs
Ranked in these QuestionsQuestion Ranking
Pros
Pro It will help you save on water costs
The WaterSense uses 30% less water than an average showerhead while keeping water pressure equally strong.
Pro You can vary your showers with four spray modes
There are four distinct spray modes that will make your showers more interesting and enjoyable. Besides the conventional full body spray, there is the softer, rain-like refreshing spray; the more powerful invigorating spray that will be extra useful for people with long, thick hair; and the massage spray with varying water pressure that massages your body.
Pro It's very easy to install
Simply unscrew the old showerhead and screw in the WaterSense. You don't even have to use any Teflon tape because it already has an embedded rubber washer that will prevent leaking and make it easier to detach the showerhead when necessary.
Pro It's sturdy for a plastic showerhead
Even though the WaterSense is made out of plastic, most people in their reviews on Moen's website as well as e-stores seem to agree that the build quality is good and that the housing is very durable for a budget-friendly plastic showerhead.
Pro It's very durable
Unlike the majority of budget showerheads, this one is made out of a metal alloy. It's much more durable than the plastic ones.
Pro It's suitable both for very tall and shorter people
Together with the shower arm, the total height of the showerhead has a range of 18 inches up or down. Accounting for the height you install it on, both taller and shorter people in your household should be able to use it comfortably.
Pro It provides good water pressure
The water stream coming from the showerhead is strong even if the water pressure in your home isn't very high.
Pro It's easy to install
The installation is as easy as removing the old showerhead, wrapping some Teflon tape around the pipe, and screwing the new one in. Though be careful not to scratch your appliances with a wrench.
Cons
Con It's not adjustable for people of different height
After you install it, there is no easy way to change the direction the showerhead faces or to adjust its height. If there are people of vastly different height at your home, you should probably look for a different option.
Con The shower arm is not included
If you don't already have a shower arm installed in your bathroom, you will have to purchase one separately.
Con There can be a little bit of leaking
After turning off the water, the showerhead may continue to drip for a few minutes before finally stoping. This is a pretty minor, although annoying issue.
Con It might clog up
The showerhead may calcify from hard water.
Con Sludge and residue tend to build up inside
Especially if you have hard water at home, residue will start to accumulate inside the showerhead. The sharp corners in the shower arm cause water to collect there, which may cause mold to grow. As an owner of this showerhead, you would be advised to pay a lot of attention to maintenance - drain and clean it regularly.
Con You have to tinker with it to get a better water flow
Right out of the box, there is a rubber water flow restrictor placed inside the showerhead. To get a better stream, you should carefully disassemble the showerhead and remove the restrictor.
Con It wouldn't fit in every shower stall
The showerhead may not fit well in smaller shower stalls because of the comparatively long 12-inch shower arm.
Con Water may leak from the joints of the setup
There are two swivel joints that connect the showerhead, the shower arm, and the pipe. This means that there are two potential points where leaking could start. To avoid that, joints could be tightened with pliers. If you tighten the joints too much, however, it will become much harder to adjust the height of the shower arm.
