When comparing Ingersoll-Rand 4151 vs Makita XOB01Z 18V LXT, the Slant community recommends Makita XOB01Z 18V LXT for most people. In the question“What are the best palm sanders around $100?” Makita XOB01Z 18V LXT is ranked 2nd while Ingersoll-Rand 4151 is ranked 3rd. The most important reason people chose Makita XOB01Z 18V LXT is:
With a maximum eccentric motion speed of 11000 RPM, this palm sander is powerful enough to efficiently deal with drywall. The 1/8" motion amplitude is also sufficient for a surface finish that's good enough to not need any further post-processing.
Specs
Ranked in these QuestionsQuestion Ranking
Pros
Pro Perfect for auto body work
The 12,000 RPM eccentric speed combined with a small, 3/16-inch sanding stroke allows for a level of surface finish suitable for auto-body work. The sander is perfect for sanding off the paint or roughing in Bondo on a car or truck.
Pro Has a dust extraction system
Contrarily to the majority of DA sanders, this instrument has a dedicated dust extraction system. It is used to collect the dust through and around the pads. As a result, the working surface is kept perfectly clean.
Pro Non-electric motor
As this palm sander does not have an electric motor, you will not have to worry about issues such as motor overheating or mechanical failures.
Pro Lightweight design
Due to its lightweight design, this palm sander is a perfect tool for long, non-stop jobs.
Pro Great for drywall
With a maximum eccentric motion speed of 11000 RPM, this palm sander is powerful enough to efficiently deal with drywall. The 1/8" motion amplitude is also sufficient for a surface finish that's good enough to not need any further post-processing.
Pro Will not fail due to drywall dust
As drywall dust is much smaller than the regular wooden dust, it is especially dangerous to the tool's electronics. In fact, many palm sanders fail after working on drywall. This tool, on the other hand, is entirely dustproof.
Pro Portable, flexible and safe due to cordless design
The cordless design of this palm sander makes it particularly useful for working on large areas and construction sites, where the access to the electricity might be limited. It is also safer to work with the cordless tools, as the cords themselves can be dangerous (you can cut it or slip on it).
Pro Has a dust bag
You don't have to worry about cleaning dust out of your workpieces, since this tool has a dust bag, which collects the dust from all around the pads. You don't need to have an external vacuum unit to work with this palm sander.
Pro Decent battery life
On a single battery charge, this cordless palm sander can work for approximately 20 - 40 minutes. Considering that the average charge-up time of a regular 18V battery is between 30 and 60 minutes, you'd need to have three batteries to work non-stop.
Cons
Con Requires an air compressor to use
This tool needs to be powered by an external air compressor, which must be capable of providing at least 439 l/min. Such compressor might cost you several hundreds of dollars.
Con Battery is not included
As the kit contains only the tool, be ready to spend another $149.00 on buying a battery and a charger. 3.0 Ah batteries are recommended for this palm sander.