When comparing Raspberry Pi 3 Model B+ vs BeagleBone Black, the Slant community recommends Raspberry Pi 3 Model B+ for most people. In the question“What are the best single-board computers?” Raspberry Pi 3 Model B+ is ranked 9th while BeagleBone Black is ranked 22nd. The most important reason people chose Raspberry Pi 3 Model B+ is:
Thanks to a new thermal management plate (heat spreader), as well as better voltage regulation, the CPU gained a nice little 200 MHz bump in clock speed over the Pi 3 Model B. Applications on the Pi 3 B+ are a little faster and snappier than their predecessor.
Specs
Ranked in these QuestionsQuestion Ranking
Pros
Pro Faster CPU than the original Pi 3 Model B
Thanks to a new thermal management plate (heat spreader), as well as better voltage regulation, the CPU gained a nice little 200 MHz bump in clock speed over the Pi 3 Model B. Applications on the Pi 3 B+ are a little faster and snappier than their predecessor.
Pro World-class support and software
What really sets the Raspberry Pi apart from the competition, and makes it leagues apart from every other SBC out there, it the software and support you get from every corner of the ecosystem regarding anything you want to make, build or do with the Pi. The most up-to-date kernels, the widest supported bundles, hats for every occasion, step-by-step instructions, and if you're trying something and get stuck, chances are high someone else has got stuck at the same spot, got past it, and left detailed instructions on how to get past it so nobody ever gets stuck there again. That is the best feature of the Raspberry Pi.
Pro Faster networking capabilities
Because of the Gigabit ethernet (although still sharing the USB 2.0 bus which limits its speed ceiling), it goes up to 3x faster than the original Pi 3 Model B. The new wireless chip supports 802.111ac, which also increases its throughput to 3x as well. Bluetooth 4.2 LE is much more stable, and it's just a nice little upgrade.
Pro Great community and developer support
The various addons boards means this is the board to go with for starters into development. Without much knowledge you can get a project up and running in a short amount of time.
Pro Extendable hardware
There are 92 expansion pins, with 46-pin female connectors on both sides of the board with other 6 serial pins to be used for debugging.
Pro On board storage
Has on board integrated storage of 4GB. It can also have an SD card in addition to the integrated storage and can boot from either of them.
Pro Programmable Real Time Units with GPIO control
Real-time coprocessors allow for embedded systems control and bit-banging communication
Pro Analog Inputs
There are 7 1.8V analog inputs.
Pro Responsive, helpful online community
Pro Easy of use
It hosts a web service over USB so it is super simple to get started with plenty of source code and examples available.
Cons
Con Superseded
the newer Model 4 is available for the same price and can do everything this does and more.
Con USB and Ethernet bandwidth shared
For cloud servers (OwnCloud, NextCloud, FTP, Media Hosting, etc...) it will take a dip on the transfer performance (when using ethernet combined with a USB Storage device) as the same controller handles the USB and Ethernet interfaces. Better performance than its predecessor, but something to keep in mind.
Con Only USB 2.0
It only has USB 2.0 ports which are painfully slow but they are also limited to 0.5 A which is not enough to power a HDD reliable.
Con Not for power users
The Pi has a 5V/2.5A DC power input which is not enough.
Con Bluetooth is very unstable - never fails to fail
Many times after successfully pairing devices it just stops working. One speaker worked for about 5minutes then stopped. Since then it will pair but will not connect. Yes the speakers work in Windows and with a Samsung Galaxy S8. Its seems to have more to do with the Raspbian OS, since using a BlueTooth dongle with it gives the same results.
Con Only one USB available for peripherals
There's only one USB port available for peripherals, which is a bit annoying considering how two USB ports is a minimum to have a keyboard and a mouse hooked up without having to use a powered USB hub.
Con Lack of a proper OpenGL driver
It sounds like the driver is possible, but the information is spread out over forums and GitHub.