When comparing Raspberry Pi 3 Model B+ vs ODROID-XU4, the Slant community recommends ODROID-XU4 for most people. In the question“What are the best single-board computers?” ODROID-XU4 is ranked 7th while Raspberry Pi 3 Model B+ is ranked 9th. The most important reason people chose ODROID-XU4 is:
Much faster than 10/100 as it contains a gigabit ethernet port.
Specs
Ranked in these QuestionsQuestion Ranking
Pros
Pro Faster CPU than the original Pi 3 Model B
Thanks to a new thermal management plate (heat spreader), as well as better voltage regulation, the CPU gained a nice little 200 MHz bump in clock speed over the Pi 3 Model B. Applications on the Pi 3 B+ are a little faster and snappier than their predecessor.
Pro World-class support and software
What really sets the Raspberry Pi apart from the competition, and makes it leagues apart from every other SBC out there, it the software and support you get from every corner of the ecosystem regarding anything you want to make, build or do with the Pi. The most up-to-date kernels, the widest supported bundles, hats for every occasion, step-by-step instructions, and if you're trying something and get stuck, chances are high someone else has got stuck at the same spot, got past it, and left detailed instructions on how to get past it so nobody ever gets stuck there again. That is the best feature of the Raspberry Pi.
Pro Faster networking capabilities
Because of the Gigabit ethernet (although still sharing the USB 2.0 bus which limits its speed ceiling), it goes up to 3x faster than the original Pi 3 Model B. The new wireless chip supports 802.111ac, which also increases its throughput to 3x as well. Bluetooth 4.2 LE is much more stable, and it's just a nice little upgrade.
Pro Great community and developer support
The various addons boards means this is the board to go with for starters into development. Without much knowledge you can get a project up and running in a short amount of time.
Pro Fast ethernet
Much faster than 10/100 as it contains a gigabit ethernet port.
Pro Great performance
The performance runs laps around competitors in terms of raw power with its impressive specs and octa-core processing.
Pro Includes cooling system
Includes fan and heatsink combo standard. Fan spins when CPU is load is high. Other single-board computers require a seperate purchase where fan runs constantly, has improper power supply, or requires complex setup for proper funtion.
Pro USB 3.0 ports
The ODROID-XU4 has two USB 3.0 ports. Making it one of the few single board computers to have them.
Pro Great OS support
ODROID supports and can run a full desktop version of Ubuntu. Other than that it can run Android, of which there are some excellent ports for ODROID-XU4.
Pro Supports eMMC 5.0 storage
Pro Includes a power button
Some single-board computers have no power button, requiring the power supply to be unplugged or customization to add a button.
Pro Fast processor and good memory capacity
It is very good for emulation.
Pro Fast processor and good memory capacity
Very good for emulation
Pro Practically very usable general purpose computer experience
Practically very usable general purpose computer experience with much lower power consumption when eMMC 5.0 storage is used for booting.
Pro Includes power adapter
Many single-board computers require you to purchase a power adapter separately.
Cons
Con Superseded
the newer Model 4 is available for the same price and can do everything this does and more.
Con USB and Ethernet bandwidth shared
For cloud servers (OwnCloud, NextCloud, FTP, Media Hosting, etc...) it will take a dip on the transfer performance (when using ethernet combined with a USB Storage device) as the same controller handles the USB and Ethernet interfaces. Better performance than its predecessor, but something to keep in mind.
Con Only USB 2.0
It only has USB 2.0 ports which are painfully slow but they are also limited to 0.5 A which is not enough to power a HDD reliable.
Con Not for power users
The Pi has a 5V/2.5A DC power input which is not enough.
Con Bluetooth is very unstable - never fails to fail
Many times after successfully pairing devices it just stops working. One speaker worked for about 5minutes then stopped. Since then it will pair but will not connect. Yes the speakers work in Windows and with a Samsung Galaxy S8. Its seems to have more to do with the Raspbian OS, since using a BlueTooth dongle with it gives the same results.
Con SD card corrupts
SD card corrupts easily with the XU4, use emmc for more stability but even then it is not that reliable. Also need to reimage the memory every so often.
Con No Audio CODEC
To get Audio out of the XU4 you need to use an HDMI device that has built-in speakers. A USB pdif will work, too.
Con Expensive
It’s expensive for a SBC, for ~$20 more you can get a faster x86 PC barebone.
Con No SATA port
Con Requires a separate power supply (no power via USB OTG)
Con Does not natively support most accessories and sensors on the market
The ODROID GPIO pins operate at 1.8V which means that it cannot support most accessories and sensors on the market which operate at 3.3V or 5V. But this can be fixed for the XU4 with the XU4 Shifter Shield which adapts them for voltages used in the market. It comes at an extra cost of $18 though.
Con SD card corrupts
SD card corrupts easily with the XU4, you can use emmc for more stability but even then it is not that reliable. You will also need to reimage the memory every so often.