Add to Chrome
Add to Edge
Add to Firefox
Add to Opera
Add to Brave
Add to SafariWhen comparing Helios4 vs Intel NUC boards, the Slant community recommends Intel NUC boards for most people. In the question“What are the best single-board computers?” Intel NUC boards is ranked 12th while Helios4 is ranked 38th. The most important reason people chose Intel NUC boards is:
You can have 16GB GSkill DDR4 Memory + 500gb SSD and 10TB external HDD. Go with the kit so you can be assured that it runs Linux and only Linux (or whatever your preference) out of the box and isn't subjected to any unnecessary use/abuse at the hand of Doors.
Question Ranking
Pros
Pro 4 X SATA 3.0
Has four SATA 3.0 ports so it can handle up to 48TB of storage (12TB on each SATA port).
Pro On paper the J5005 maxes out at 8gb DDR4 RAM however it can accommodate at lease double that
You can have 16GB GSkill DDR4 Memory + 500gb SSD and 10TB external HDD. Go with the kit so you can be assured that it runs Linux and only Linux (or whatever your preference) out of the box and isn't subjected to any unnecessary use/abuse at the hand of Doors.
Pro Has at least one SATA port
Pro DRAM is not soldered
DRAM modules are not soldered to the board so they can be changed, upgraded or replaced.
Pro x86-based
Can run all IBM-PC compatible software.
Cons
Con The project fall down
Con No battery or UPS
A PC tailored for NAS usage should have a battery or UPS to prevent data corruption after a power loss. A tiny battery to safely shut it down would be enough.
Con Company shut down business!
See their website-shop.
Con Expensive
After the preorder It is expensive now.
Con Cost as much as other Barebones
Price is almost the same as a full Intel/Zotac barebone, which can also be dismantled.
Con No GPIO
So it is not really useful for DIY projects.
Con No DRAM included
DRAM modules must be bought separately.
