When comparing ASUS PB279Q vs ViewSonic XG2700-4K, the Slant community recommends ASUS PB279Q for most people. In the question“What are the best monitors?” ASUS PB279Q is ranked 31st while ViewSonic XG2700-4K is ranked 214th. The most important reason people chose ASUS PB279Q is:
The top and side bezels are about 13mm thin with the bottom bezel being slightly thicker at 18mm.
Specs
Ranked in these QuestionsQuestion Ranking
Pros
Pro Thin bezels
The top and side bezels are about 13mm thin with the bottom bezel being slightly thicker at 18mm.
Pro Reasonably good luminance uniformity
The screen also has good luminance uniformity, providing a evenly lit picture. At the dimmest point, the deviation is 12% from the brightest point (141.4 cd/m² to 160.4 cd/m²).
Pro Low input lag
Complete input lag time (signal delay and pixel response time) is 7.4ms or under ½ of a frame.
Pro Easily adjustable
The monitor tilts (5° forward, 20° backward), swivels (60° to both the left and right), pivots (90° clockwise, allowing it to be used in portrait mode) and allows adjusting height between 43mm (1.69") to 410mm (16.14").
Pro Good contrast and brightness
According to tests performed by PC Monitors, PB279Q set to factory defaults (90% brightness, "Splendid" preset) produces luminance in the range of 0.24 - 282 cd/m² with a contrast of 1175. It provides both lots of brightness and reasonably dark blacks.
Pro Good color accuracy
The monitor covers all of sRGB space and represents the colors accurately.
Pro Superb color accuracy and picture reproduction
ViewSonic takes color accuracy seriously with this monitor, as it is comes calibrated out of the box. The monitor uses a 10-bit panel and can display 99% of the sRGB color range. On top of that, it has almost no issues with screen uniformity, color accuracy and gamut. This makes it great for editing photos, videos and other types of work that require accurate colors.
Pro Plenty of input options
ViewSonic has equipped this monitor with very generous input options. It has three HDMI 2.0, one DisplayPort and one DisplayPort mini. It also has four USB 3.0 ports, two of which are on the right side of the monitor for easy access.
Pro Allows you to view from four inputs at once
If needed, the monitor allows you to view from four inputs at once, or to show them picture-on-picture.
Pro Easily adjustable
Its height, swivel, tilt and orientation can all be freely adjusted, and is attachable to a VESA compatible wall mount or stand.
Pro Excellent input lag, decent pixel response time
Input lag is almost non-existent on this screen, at only 9.9ms if the “Extreme” input mode is selected. This makes this monitor among the fastest in the market. Since it uses a slower IPS panel (compared to TN panels), the pixel response time measures just 5ms, which isn’t the best, but is good for most situations.
Cons
Con A maximum refresh rate of 60Hz can be a concern for some
A 60Hz monitor, while sufficient for most people in most cases, can still cause issues with fast-moving objects on screen. It's especially important with things like gaming where the ability to react to events happening on the screen quickly is important.
Con Minor color temperature uniformity issues
According to Spyder4Elite tests performed by PC Monitor, PB279Q has color temperature issues that can be seen with the naked eye. A DeltaE deviation of over 3 can be easily noticed and the left side of the monitor deviates between 2.4 and 3.1.
Con AHVA glow
AHVA glow is the light on the sides or corners of the screen that can reduce some of the peripheral detail.
Con HDMI connections are limited to 30Hz
DisplayPort 1.2 (or MiniDP 1.2) is needed to run at 60Hz.
Con Gaming presets do not bring any real improvements to the visual quality
Although there are a lot of gaming presets to choose on the monitor, they are either too bright or dark and do not bring any real improvements on the visual qualities.
