Add to Chrome
Add to Edge
Add to Firefox
Add to Opera
Add to Brave
Add to SafariWhen comparing ASUS PB279Q vs BenQ BL2711U, the Slant community recommends ASUS PB279Q for most people. In the question“What are the best monitors?” ASUS PB279Q is ranked 31st while BenQ BL2711U is ranked 49th. The most important reason people chose ASUS PB279Q is:
The top and side bezels are about 13mm thin with the bottom bezel being slightly thicker at 18mm.
Specs
Question Ranking
Pros
Pro Thin bezels
The top and side bezels are about 13mm thin with the bottom bezel being slightly thicker at 18mm.
Pro Reasonably good luminance uniformity
The screen also has good luminance uniformity, providing a evenly lit picture. At the dimmest point, the deviation is 12% from the brightest point (141.4 cd/m² to 160.4 cd/m²).
Pro Low input lag
Complete input lag time (signal delay and pixel response time) is 7.4ms or under ½ of a frame.
Pro Easily adjustable
The monitor tilts (5° forward, 20° backward), swivels (60° to both the left and right), pivots (90° clockwise, allowing it to be used in portrait mode) and allows adjusting height between 43mm (1.69") to 410mm (16.14").
Pro Good contrast and brightness
According to tests performed by PC Monitors, PB279Q set to factory defaults (90% brightness, "Splendid" preset) produces luminance in the range of 0.24 - 282 cd/m² with a contrast of 1175. It provides both lots of brightness and reasonably dark blacks.
Pro Good color accuracy
The monitor covers all of sRGB space and represents the colors accurately.
Pro Cover all of sRGB color gamut
The monitor covers all of sRGB space and with some calibration is capable of representing the colors accurately.
Pro Good contrast
Pro Smooth surface
Among the least grainy matte surfaces available for UHD monitors.
Pro Low input lag
Complete input lag time (signal delay and pixel response time) is 6.85ms or under ½ of a frame.
Pro Can automatically shut down when you're away
The monitor has a proximity sensor that allows it to be automatically set to standby mode once you're away from the monitor for more than 40 seconds.
Pro Can auto-adjust brightness throughout the day
Can be set to automatically adjust brightness due to the built in ambient light sensor.
Cons
Con A maximum refresh rate of 60Hz can be a concern for some
A 60Hz monitor, while sufficient for most people in most cases, can still cause issues with fast-moving objects on screen. It's especially important with things like gaming where the ability to react to events happening on the screen quickly is important.
Con Minor color temperature uniformity issues
According to Spyder4Elite tests performed by PC Monitor, PB279Q has color temperature issues that can be seen with the naked eye. A DeltaE deviation of over 3 can be easily noticed and the left side of the monitor deviates between 2.4 and 3.1.
Con AHVA glow
AHVA glow is the light on the sides or corners of the screen that can reduce some of the peripheral detail.
Con HDMI connections are limited to 30Hz
DisplayPort 1.2 (or MiniDP 1.2) is needed to run at 60Hz.
Con A maximum refresh rate of 60Hz can be a concern for some
A 60Hz monitor, while sufficient for most people in most cases, can still cause issues with fast-moving objects on screen. It's especially important with things like gaming where the ability to react to events happening on the screen quickly is important.
Con AHVA glow
AHVA glow is the light on the sides or corners of the screen that can reduce some of the peripheral detail.
Con Poor dynamic contrast implementation
Dynamic Contrast is an optional feature meant to increase or decrease the back-lighting depending on scene that is displayed in order to get higher dynamic range. Unfortunately, the implementation tends to slightly overshoot on highs regardless of the settings used.
Con Some color temperature uniformity issues
According to Spyder5Elite tests performed by PC Monitor, BL2711U has color temperature issues that can be seen with the naked. A DeltaE deviation of over 3 can be easily noticed and there are deviation of up to 3.8.
