When comparing BeagleBone Black vs ASUS Tinker Board S, the Slant community recommends ASUS Tinker Board S for most people. In the question“What are the best single-board computers?” ASUS Tinker Board S is ranked 10th while BeagleBone Black is ranked 22nd. The most important reason people chose ASUS Tinker Board S is:
The Asus Tinker Board S is a more powerful single-board computer than a Raspberry Pi Model B since it has a more powerful microprocessor as well as larger and faster RAM memory.
Specs
Ranked in these QuestionsQuestion Ranking
Pros
Pro Extendable hardware
There are 92 expansion pins, with 46-pin female connectors on both sides of the board with other 6 serial pins to be used for debugging.
Pro On board storage
Has on board integrated storage of 4GB. It can also have an SD card in addition to the integrated storage and can boot from either of them.
Pro Programmable Real Time Units with GPIO control
Real-time coprocessors allow for embedded systems control and bit-banging communication
Pro Analog Inputs
There are 7 1.8V analog inputs.
Pro Responsive, helpful online community
Pro Easy of use
It hosts a web service over USB so it is super simple to get started with plenty of source code and examples available.
Pro Fair performance
The Asus Tinker Board S is a more powerful single-board computer than a Raspberry Pi Model B since it has a more powerful microprocessor as well as larger and faster RAM memory.
Pro Stays cool
The ASUS Tinker Board S doesn't have problems related to overheating because it comes with a massive heatsink that can dissipate all heat generated by the board's powerful microprocessor.
Pro Simple setup
All you need to do to set this board up and running is to upload the appropriate Android or Linux image. Both images can be obtained from the ASUS's official web resource in the form of downloadable .zip files. Simply download the files and drivers on your computer and use the Etcher to flash the Tinker Board S. Overall, the process takes around 10 minutes to complete.
Pro Has on-board WiFi and Bluetooth
You'll have no problem connecting to a WiFi network or Bluetooth peripherals with the Tinker Board S since it comes with an onboard 802.11 b/g/n - compliant WiFi and Bluetooth transceiver.
Pro Has some on-board storage
Unlike the previous version of the ASUS's Tinker Board, the model S comes equipped with a 16GB eMMC storage which means that you'll always have some space to store the computer's OS as well as some extra applications.
The eMMC memory performs on par with the more commonly known SD memory used on the majority of other single board computers out there since both of those are based on NAND.
Pro Fits the Raspberry Pi's case
You'll not have to tinker around finding the case for this single-board computer since it has the same form factor as the Raspberry Pi 3. You can find a variety of cases that start at around $6.50 here.
Pro Multi-OS platform
Right now, Tinker Board S can run both Android and Linux. Linux comes in the form of TinkerOS_Debian that is based on a well-known Debian distribution while the TinkerOS_Android is based on the Android 6.
Pro Outputs in 4K
This single board-computer has enough juice to stream the 4K media at the frame rate of 30Hz through its HDMI port.
Pro Less risk to fry a board with a cheap power supply
You're less likely to fry this SBC than some of the other ones because the Tinker Board S has the low-voltage detection circuitry which will shut down the computer if it detects inappropriately low voltage coming from the power supply. Usually, cheaper power adapters are the ones that fail to reach the needed 5V mark.
Pro Better build
Clear and colorful design.
Cons
Con Only one USB available for peripherals
There's only one USB port available for peripherals, which is a bit annoying considering how two USB ports is a minimum to have a keyboard and a mouse hooked up without having to use a powered USB hub.
Con Lack of a proper OpenGL driver
It sounds like the driver is possible, but the information is spread out over forums and GitHub.
Con Comes without a power supply
You'll need to spend some extra money on a power supply unit since this board doesn't come with the one.
Con Once eMMC gets stuck it’s a headache
Once you get the eMMc stuck with switching operating system it’s a real nightmare to fix it
Con MicroUSB power connector
Con Power-hungry
This single-board computer is quite demanding when it comes to power since it is recommended to be used with a 3A power supply.