Add to Chrome
Add to Edge
Add to Firefox
Add to Opera
Add to Brave
Add to SafariWhen comparing BeagleBone Black vs Intel NUC boards, the Slant community recommends Intel NUC boards for most people. In the question“What are the best single-board computers?” Intel NUC boards is ranked 12th while BeagleBone Black is ranked 22nd. The most important reason people chose Intel NUC boards is:
You can have 16GB GSkill DDR4 Memory + 500gb SSD and 10TB external HDD. Go with the kit so you can be assured that it runs Linux and only Linux (or whatever your preference) out of the box and isn't subjected to any unnecessary use/abuse at the hand of Doors.
Specs
Question Ranking
Pros
Pro Extendable hardware
There are 92 expansion pins, with 46-pin female connectors on both sides of the board with other 6 serial pins to be used for debugging.
Pro On board storage
Has on board integrated storage of 4GB. It can also have an SD card in addition to the integrated storage and can boot from either of them.
Pro Programmable Real Time Units with GPIO control
Real-time coprocessors allow for embedded systems control and bit-banging communication
Pro Analog Inputs
There are 7 1.8V analog inputs.
Pro Responsive, helpful online community
Pro Easy of use
It hosts a web service over USB so it is super simple to get started with plenty of source code and examples available.
Pro On paper the J5005 maxes out at 8gb DDR4 RAM however it can accommodate at lease double that
You can have 16GB GSkill DDR4 Memory + 500gb SSD and 10TB external HDD. Go with the kit so you can be assured that it runs Linux and only Linux (or whatever your preference) out of the box and isn't subjected to any unnecessary use/abuse at the hand of Doors.
Pro Has at least one SATA port
Pro DRAM is not soldered
DRAM modules are not soldered to the board so they can be changed, upgraded or replaced.
Pro x86-based
Can run all IBM-PC compatible software.
Cons
Con Only one USB available for peripherals
There's only one USB port available for peripherals, which is a bit annoying considering how two USB ports is a minimum to have a keyboard and a mouse hooked up without having to use a powered USB hub.
Con Lack of a proper OpenGL driver
It sounds like the driver is possible, but the information is spread out over forums and GitHub.
Con Cost as much as other Barebones
Price is almost the same as a full Intel/Zotac barebone, which can also be dismantled.
Con No GPIO
So it is not really useful for DIY projects.
Con No DRAM included
DRAM modules must be bought separately.
