Add to Chrome
Add to Edge
Add to Firefox
Add to Opera
Add to Brave
Add to SafariWhen comparing ODROID-XU4 vs Intel NUC Kit NUC7i3BNH, the Slant community recommends ODROID-XU4 for most people. In the question“What are the best single-board computers?” ODROID-XU4 is ranked 7th while Intel NUC Kit NUC7i3BNH is ranked 27th. The most important reason people chose ODROID-XU4 is:
Much faster than 10/100 as it contains a gigabit ethernet port.
Specs
Question Ranking
Pros
Pro Fast ethernet
Much faster than 10/100 as it contains a gigabit ethernet port.
Pro Great performance
The performance runs laps around competitors in terms of raw power with its impressive specs and octa-core processing.
Pro Includes cooling system
Includes fan and heatsink combo standard. Fan spins when CPU is load is high. Other single-board computers require a seperate purchase where fan runs constantly, has improper power supply, or requires complex setup for proper funtion.
Pro USB 3.0 ports
The ODROID-XU4 has two USB 3.0 ports. Making it one of the few single board computers to have them.
Pro Great OS support
ODROID supports and can run a full desktop version of Ubuntu. Other than that it can run Android, of which there are some excellent ports for ODROID-XU4.
Pro Supports eMMC 5.0 storage
Pro Includes a power button
Some single-board computers have no power button, requiring the power supply to be unplugged or customization to add a button.
Pro Fast processor and good memory capacity
It is very good for emulation.
Pro Fast processor and good memory capacity
Very good for emulation
Pro Practically very usable general purpose computer experience
Practically very usable general purpose computer experience with much lower power consumption when eMMC 5.0 storage is used for booting.
Pro Includes power adapter
Many single-board computers require you to purchase a power adapter separately.
Pro Comes with appropriate case and mounting hardware for storage drives
While the cost may seem steep compared to other SBC options, seldom are those other options sold with a case that will also house your storage drives and provide adequate cooling for the entire setup.
Pro SATA III port and M.2 NVMe connector with on-board RAID-0/RAID-1 controller
The ability to harness the power of a standard 2.5" SATA III drive and an M.2 NVMe drive with four PCI Express 3.0 lanes means that sequential read rates in excess of 3GB/sec if both are SSDs. Add to that hardware RAID support and it's hard to imagine a more powerful digital storage platform anywhere near this size.
Cons
Con SD card corrupts
SD card corrupts easily with the XU4, use emmc for more stability but even then it is not that reliable. Also need to reimage the memory every so often.
Con No Audio CODEC
To get Audio out of the XU4 you need to use an HDMI device that has built-in speakers. A USB pdif will work, too.
Con Expensive
It’s expensive for a SBC, for ~$20 more you can get a faster x86 PC barebone.
Con No SATA port
Con Requires a separate power supply (no power via USB OTG)
Con Does not natively support most accessories and sensors on the market
The ODROID GPIO pins operate at 1.8V which means that it cannot support most accessories and sensors on the market which operate at 3.3V or 5V. But this can be fixed for the XU4 with the XU4 Shifter Shield which adapts them for voltages used in the market. It comes at an extra cost of $18 though.
Con SD card corrupts
SD card corrupts easily with the XU4, you can use emmc for more stability but even then it is not that reliable. You will also need to reimage the memory every so often.
Con Unstable USB support
Con Higher initial costs than most other options
It's clearly not a budget option for building a home NAS, but if you want performance and more importantly, scalability, then you'll reap the benefits of the extra upfront costs many times over as you upgrade the memory, add peripherals via USB-C and put that 7th Generation Core i3 processor to work.
