HummingBoard Gate vs ASUS Tinker Board S

Since the HummingBoard Gate comes with different versions, including different CPU versions, it can also run the same software without any problem on any CPU regardless of the number of cores.

HummingBoard-Pro and HummingBoard-Base fit inside a Raspberry Pi model B case (but be aware that many cases will block the IR).

Hummingboard Gate has a native mikroBUS system which lets users attach any “click board” that’s compatible with MikroElektronika’s system. This way the board can be extended by adding motion sensors, wifi cards, physical buttons, temperature sensors, NFC or Bluetooth and much more.

HummingBoard works really well with Kodi and can be turned into a media streaming device with ease.

Hummingboard supports OpenELEC 5.0, GeexBox XBMC, Android and Debian officially, but it can also run ArchLinux, openSUSE and Fedora successfully.

The Asus Tinker Board S is a more powerful single-board computer than a Raspberry Pi Model B since it has a more powerful microprocessor as well as larger and faster RAM memory.

The ASUS Tinker Board S doesn't have problems related to overheating because it comes with a massive heatsink that can dissipate all heat generated by the board's powerful microprocessor.

You'll have no problem connecting to a WiFi network or Bluetooth peripherals with the Tinker Board S since it comes with an onboard 802.11 b/g/n - compliant WiFi and Bluetooth transceiver.

Unlike the previous version of the ASUS's Tinker Board, the model S comes equipped with a 16GB eMMC storage which means that you'll always have some space to store the computer's OS as well as some extra applications.

The eMMC memory performs on par with the more commonly known SD memory used on the majority of other single board computers out there since both of those are based on NAND.

All you need to do to set this board up and running is to upload the appropriate Android or Linux image. Both images can be obtained from the ASUS's official web resource in the form of downloadable .zip files. Simply download the files and drivers on your computer and use the Etcher to flash the Tinker Board S. Overall, the process takes around 10 minutes to complete.

You'll not have to tinker around finding the case for this single-board computer since it has the same form factor as the Raspberry Pi 3. You can find a variety of cases that start at around $6.50 here.

Right now, Tinker Board S can run both Android and Linux. Linux comes in the form of TinkerOS_Debian that is based on a well-known Debian distribution while the TinkerOS_Android is based on the Android 6.

This single board-computer has enough juice to stream the 4K media at the frame rate of 30Hz through its HDMI port.

You're less likely to fry this SBC than some of the other ones because the Tinker Board S has the low-voltage detection circuitry which will shut down the computer if it detects inappropriately low voltage coming from the power supply. Usually, cheaper power adapters are the ones that fail to reach the needed 5V mark.

Clear and colorful design.