When comparing EinScan-Pro vs Fuel3D SCANIFY, the Slant community recommends EinScan-Pro for most people. In the question“What are the best handheld 3D scanners?” EinScan-Pro is ranked 1st while Fuel3D SCANIFY is ranked 5th. The most important reason people chose EinScan-Pro is:
The EinScan Pro has four modes (though two of them require an add-on), each matching a specific need. With no add-ons, the device can be used on the Handheld Rapid and HD Scan modes, which offer differing levels of accuracy and methods for stitching. With the industrial add-on pack, the EinScan-Pro can also detect color and texture, and the Automatic and Free Scan modes use a turntable for very fast, accurate scans of small objects.
Specs
Ranked in these QuestionsQuestion Ranking
Pros
Pro Four modes can suit most scanning needs
The EinScan Pro has four modes (though two of them require an add-on), each matching a specific need. With no add-ons, the device can be used on the Handheld Rapid and HD Scan modes, which offer differing levels of accuracy and methods for stitching. With the industrial add-on pack, the EinScan-Pro can also detect color and texture, and the Automatic and Free Scan modes use a turntable for very fast, accurate scans of small objects.
Pro Good cost-to-quality ratio
The EinScan-Pro boasts professional quality similar to the Artec Eva, at a third the price. While still costly for the basic tinkerer, this scanner is of sufficient quality to appeal to more advanced users.
Pro Software can automatically stitch scans together
When multiple scans of an object are taken, to form the 3D model, there is often a step that requires the user to manually align scans to form the whole image. Some exceptions aside, the software used alongside the EinScan-Pro can do this automatically with surprising accuracy, making everything much easier.
Pro If enabled, free and automatic scans are incredibly fast
If one purchases the Industrial Add-on Pack, which adds a turntable and a tripod for $700, objects on the turntable can be scanned with uncanny speed: one or two 2 second scans can produce a very high-quality 3D model, even on a glossy surface: example
Pro Slick look
While not necessary to the functionality of the scanner, the EinScan-Pro has a nice, sharp look that goes well in any modern office or home.
Pro Very light
The EinScan-Pro only weighs 0.8 kg (less than 2 lbs), allowing for an easy, smooth, and comfortable scanning process, even over long periods of time.
Pro Great scanning resolution
As a handheld 3D scanner, the 0.35mm scanning resolution gives out great results. It even beats more expensive scanners like the Artec Eva.
Pro Scanning process is quick
It only takes a fraction of a second to capture a single scan. This is great for scanning in a dynamic environment. It also makes face scans hassle-free, since other SLS 3D scanners struggle to capture them, due to micro movements.
Cons
Con Requires high-end hardware
EinScan recommends at least 2GB of dedicated video memory, 8GB of RAM, and an i5 processor or higher. While the processor requirements aren't too severe, the dedicated video memory minimum is quite high. However, when compared to the cost of the scanner, a computer like this may not be too much to ask.
Con Does not operate outside
As is the case for many optical scanners, the EinScan-Pro has difficulty dealing with very bright light. Scanning outside, during the day is difficult, if not impossible.
Con Does not scan color or texture by default
An additional module is required to enable the scanning of color and textures.
Con You need to be close to the target object
The recommended distance between the scanner and the object is between 0.35 and 0.45 m, which is quite limited and as the secondary effect of limiting the maximum object dimensions. Scans made outside the specified range yields unusable data.
Con The software is quite complicated to use
This scanner operates by combining stereoscopy (used to assess depth of an image) and photometry (used to measure brightness of light), which has the disadvantage of needing multiple scans of the same object to be arranged by the user. While not impossible to learn, you will need to take some time to read through technical documentation and watch the tutorial videos provided by Fuel3D.
Con You may end up having to pay for software
Even though there’s a free version of Fuel3D Studio, it’s very limited in features when compared to the Advanced version, which costs $190.00/month. For example, the free version only allows you to stitch up to six scans, while the Advanced version allows you to combine an unlimited amount of scans, resulting in higher resolutions and better overall scan quality.