When comparing Libre Computer AML-S905X-CC (Le Potato) vs Intel NUC boards, the Slant community recommends Intel NUC boards for most people. In the question“What are the best single-board computers?” Intel NUC boards is ranked 12th while Libre Computer AML-S905X-CC (Le Potato) is ranked 42nd. The most important reason people chose Intel NUC boards is:
You can have 16GB GSkill DDR4 Memory + 500gb SSD and 10TB external HDD. Go with the kit so you can be assured that it runs Linux and only Linux (or whatever your preference) out of the box and isn't subjected to any unnecessary use/abuse at the hand of Doors.
Ranked in these QuestionsQuestion Ranking
Pros
Pro Compatible with Raspberry Pi 3 cases
USB 3.0, 2GB Ram, S905 chipset
Pro On paper the J5005 maxes out at 8gb DDR4 RAM however it can accommodate at lease double that
You can have 16GB GSkill DDR4 Memory + 500gb SSD and 10TB external HDD. Go with the kit so you can be assured that it runs Linux and only Linux (or whatever your preference) out of the box and isn't subjected to any unnecessary use/abuse at the hand of Doors.
Pro Has at least one SATA port
Pro DRAM is not soldered
DRAM modules are not soldered to the board so they can be changed, upgraded or replaced.
Pro x86-based
Can run all IBM-PC compatible software.
Cons
Con No Wi-Fi or Bluetooth, unique eMMC connector
Only eMMC modules from Libre Computer are compatible, the board and modules' male/female connectors are reversed, so while it is "open hardware" as the rest of the board, this particular feature effectively locks-in consumer, just as if it were proprietary. While not a major obstacle, violating the spirit of FOSH without technically violating open standards is off-putting.
Con Cost as much as other Barebones
Price is almost the same as a full Intel/Zotac barebone, which can also be dismantled.
Con No GPIO
So it is not really useful for DIY projects.
Con No DRAM included
DRAM modules must be bought separately.