When comparing ODROID-W vs SanCloud BeagleBone Enhanced WiFi 1G, the Slant community recommends SanCloud BeagleBone Enhanced WiFi 1G for most people. In the question“What are the best single-board computers?” SanCloud BeagleBone Enhanced WiFi 1G is ranked 59th while ODROID-W is ranked 64th.
Specs
Ranked in these QuestionsQuestion Ranking
Pros
Pro Software compatible with the Raspberry Pi
ODROID-W is compatible with the Raspberry Pi at least as far as software goes. It can run any software built for the Pi.
Pro Amazing heat dissipation
The ODROID-W has some great heat dissipation. From studying the heat of the heatsink, the maximum temperature registered was 37 degrees Celsius, and that was registered when the board was doing a lot of unpacking through apt-get. Normally the temperature is even lower than that.
Pro Can fit most Pi cases
Since it's built to emulate the Raspberry Pi, it's roughly the same shape albeit a bit smaller. But even then it should be able to fit most Raspberry Pi cases.
Pro Pin to Pin Compatible with the BeagleBone Black
Pro Onboard Storage
4GB 8-bit eMMC onboard flash storage for main firmware image and also a micro-SD for programming and extra storage
Pro Excellent Support
Super support from SanCloud and the wider BeagleBoard community
Pro Connect up to 20 devices.
Connect 10 devices out of the box. Up to 20 devices can be connected by a simple OTG port and config modification.
Pro Plenty of I/Os and more speed & power than the BeagleBone Black.
Cons
Con Obsolete
Don't fall in love, this model is no longer available.
Con No on-board Ethernet
The ODROID-W has no on-board Ethernet port available, however this can be fixed by using a docking board which has an Ethernet jack.
Con Needs a multi-USB hub
Since it only has a USB host connector available for a full-sized port, you most certainly will need a multi-USB hub to connect more than one external devices to the board.